The high pressure refrigerant will become both liquid and gas status after the heat is scattered. And it must enter into the evaporator under the condition of liquid refrigerant status to get the best cooling effect, so this is the reason to set up a refrigerant receiver, whose function is to store the high pressure refrigerant first and then suck the liquid refrigerant from the bottom to the evaporator. This is the best way for the evaporator to produce the best cooling effect.
Feature:
The installation is not limited by angles
Corrosion resistant painting
Maximum working pressure: 3.5Mpa/500Psig, with the UL and CE certification.
| TYPE |
Dimensions |
Connection Size |
Refrigerant Capacity(LBS) |
| C |
A |
IN |
OUT |
R-134a |
R-22 |
R-404a/ R-507 |
| SPLC-101 |
3.35 |
7.87 |
3/8 |
1/4 |
2.5 |
2.4 |
2.5 |
| SPLC-102 |
5 |
10.24 |
3/8 |
3/8 |
6.1 |
5.8 |
6 |
| SPLC-103 |
5 |
11.42 |
3/8 |
3/8 |
7 |
6.7 |
6.8 |
| SPLC-104 |
6 |
13.78 |
1/2 |
1/2 |
10 |
9.5 |
9.8 |
| SPLC-105 |
7 |
16.15 |
5/8 |
5/8 |
14 |
13.2 |
13.5 |
| SPLC-106 |
6.5 |
23.6 |
3/4 |
3/4 |
17.64 |
16.63 |
17.01 |
| SPLC-107 |
6.5 |
27.56 |
7/8 |
7/8 |
20.58 |
19.4 |
25 |
Audited Supplier 
){kind=link}
){kind=link}